Ander, EL; Watts, MJ; Smedley, PL; Hamilton, EM; Close, R; Crabbe, H; Fletcher, T; Rimell, A; Studden, M; Leonardi, G; (2016) Variability in the chemistry of private drinking water supplies and the impact of domestic treatment systems on water quality. Environmental geochemistry and health, 38 (6). pp. 1313-1332. ISSN 0269-4042 DOI: https://doi.org/10.1007/s10653-016-9798-0
Permanent Identifier
Use this Digital Object Identifier when citing or linking to this resource.
Abstract
Tap water from 497 properties using private water supplies, in an area of metalliferous and arsenic mineralisation (Cornwall, UK), was measured to assess the extent of compliance with chemical drinking water quality standards, and how this is influenced by householder water treatment decisions. The proportion of analyses exceeding water quality standards were high, with 65 % of tap water samples exceeding one or more chemical standards. The highest exceedances for health-based standards were nitrate (11 %) and arsenic (5 %). Arsenic had a maximum observed concentration of 440 µg/L. Exceedances were also high for pH (47 %), manganese (12 %) and aluminium (7 %), for which standards are set primarily on aesthetic grounds. However, the highest observed concentrations of manganese and aluminium also exceeded relevant health-based guidelines. Significant reductions in concentrations of aluminium, cadmium, copper, lead and/or nickel were found in tap waters where households were successfully treating low-pH groundwaters, and similar adventitious results were found for arsenic and nickel where treatment was installed for iron and/or manganese removal, and successful treatment specifically to decrease tap water arsenic concentrations was observed at two properties where it was installed. However, 31 % of samples where pH treatment was reported had pH < 6.5 (the minimum value in the drinking water regulations), suggesting widespread problems with system maintenance. Other examples of ineffectual treatment are seen in failed responses post-treatment, including for nitrate. This demonstrates that even where the tap waters are considered to be treated, they may still fail one or more drinking water quality standards. We find that the degree of drinking water standard exceedances warrant further work to understand environmental controls and the location of high concentrations. We also found that residents were more willing to accept drinking water with high metal (iron and manganese) concentrations than international guidelines assume. These findings point to the need for regulators to reinforce the guidance on drinking water quality standards to private water supply users, and the benefits to long-term health of complying with these, even in areas where treated mains water is widely available.
Item Type | Article |
---|---|
Faculty and Department | Faculty of Public Health and Policy > Public Health, Environments and Society |
PubMed ID | 26810082 |
ISI | 387478100008 |
Related URLs |
Download
Filename: Variability in the chemistry of private drinking water supplies and the impact of domestic treatment systems on water quality.pdf
Licence: Creative Commons: Attribution-Noncommercial-No Derivative Works 3.0
Download